TSS-1080p Variable Time Delay
- Single channel 1080p variable delay server
- High quality 10bit, H.264 @ 100Mbs video
- Delays from 30 seconds to 24 hours
- Locate and Play anywhere in the delayed video
- Play, pause, jog, shuttle to any point within the recorded time
- HD-SDI or SD-SDI I/O
- Control from anywhere with the included Remote Workstation software
- GPIO controls
- 16 channels of embedded audio
- Encodes VANC data such as Closed Captions (608 or 708) and AFD
- RAID 5 protection of content
- Single-frame time adjustment
- Small 1U form factor
- Server grade components, Linux® OS
A high quality 1080p Video Delay solution is born.
The TSS-1080p Variable Time Delay incorporates the ability to delay a 1080p broadcast from 30 seconds up to 24 hours. Just as in the TSS-2470II, the amount of delay time can be adjusted on-the-fly without loss of any currently recorded time. The applications for being able to reliably and frame accurately delay a 1080p video stream range from live competitive gaming events to theatrical production.
The TSS-1080p maintains the high quality 1080p image by using H.264 compression at 100Mbps to reproduce the delayed feed with exceptional quality. As with all our servers, high reliability is achieved by using sever grade components, RAID 5 storage, redundant power and cooling and a space saving 1U chassis.
Maintaining a simple user interface makes adjusting and readjusting the amount of delay time easy. Establish an initial delay time in the primary delay window, then utilizing any of the four preset buttons or transport controls, change the delay as needed. This methodology provides users with a simple way to initiate different amounts of delay time without the need for manual recording and rebroadcasting. The input feed is automatically delayed the set amount of time without any further user inputs required.
Like the TSS-2470II, the TSS-1080p still supports all broadcast formats – 720p, 1080i, 1080p and NTSC/PAL at frame rates of 29.97/59.94 or 25/50 Hz. Because the TSS-2470II transports high-value program content, it employs a four-drive, RAID 5 disk array for enhanced reliability. Drives and power supplies are hot swappable allowing the system to continue running without downtime. With its 1U form factor, power consumption is low, and forced-air cooling extends component life and reliability.
Should the the TSS-1080p system need to be controlled from a remote location, the included Remote Workstation software application can be used to connect to the server GUI or the optional GPIO triggers may be implemented. Other features include high-quality 10 bit video with up to 16 channels of embedded audio and support for closed captions and other VANC data. A live feed monitor output and frame accurate delay from 30 seconds to 24 hours or more, round out an excellent standard feature set.
• HDSDI, SDSDI compatibility up to 1080p
• Configurable for 29.97/59.94 or 25/50 fps operation
• Frame accurate delay from 30 sec. to 24 hrs.
• Closed caption / VANC data support
• High quality 10 bit video and 24 bit audio support
• Up to 16 channels of embedded audio
• Intuitive graphical interface
• Simple controls for setting delay times
• Standard transport controls
• Remote Workstation control
• RAID 5 protected storage
• Space saving 1U chassis design
• Redundant cooling and power
• Live feed monitor and delayed outputs
• Dependable Linux® based OS
PRIMARY VIDEO |
|
Channels | 1, selectable HD or SD, with outputs for delayed program and monitor (input pass-thru) |
Video Input | HD-SDI, SMPTE 292M, or SD-SDI (SMPTE 259M) HD-BNC Connector |
Video Monitor Output | HD-SDI, SMPTE 292M, or SD-SDI (SMPTE 259M) HD-BNC Connector |
Delayed Video Output | HD-SDI, SMPTE 292M, or SD-SDI (SMPTE 259M) HD-BNC Connector |
Video Format | 1080p at 59.94 or 50 Hz; 1080i at 29.97 or 25 Hz; 720p at 59.94 or 50 fps; 525/60 NTSC; 625/50 PAL |
Ancillary Data | Passes, records and reproduces all VANC lines in HD formats. |
Video Genlock | Black burst, tri-level, HD-BNC Connector |
Video Encoding | HD AVC100, SD MPEG-2 |
Output Sync Reference | Genlock or fail-over to Video Input |
Drift, long term | Zero frames |
VIDEO MONITOR OUTPUT |
|
E-E Input Monitor | HD-SDI, SD-SDI |
ANCILLARY DATA |
|
Closed Captions | HD – 608/708 in VANC; SD – Line 21 VBI |
AUDIO |
|
Embedded Audio | 16 channels – SMPTE 299M |
Sampling Frequency | 48 kHz |
STORAGE |
|
Disk Storage System | 4 server-grade SATA drives in RAID-5 array |
Maximum Delay Time | > 24 hours HD (> 76 hours SD) Drive size options available extend to multi day delays |
Delay Adjustment | Via GUI in HH:MM:SS:FF to one-frame precision. Non-volatile |
Drive Replacement | Front access |
USER CONTROLS |
|
System Control | Graphical User Interface (GUI) |
Remote Control | Remote Workstation for PC |
GPIO | 12 GPI and 12 GPO |
Control Devices | Keyboard and mouse (supplied), VGA video monitor (not supplied) |
Time Delay Setting | HH:MM:SS:FF on GUI Minimum delay 30 seconds. |
Unit shutdown | Accessible with momentary switch through front panel or GUI |
DIAGNOSTIC |
|
Fault Monitoring | Front Panel LEDs: power, system, network |
Error Log | Diagnostic data downloadable through Ethernet connection |
MISCELLANEOUS |
|
Mechanical | 1U Rack mount: 13/4” x 19” x 25.63” [45 x 483 x 651 mm]. Weight: 26 lb [12 Kg] |
Power | Dual Redundant, 100-250V – 50/60 Hz. 750W, rear panel plug-in |
Cooling | Forced air; multiple fans |
Software Upgrades | USB |
Operating System | Linux® |
Country of Origin | Made in U.S.A. |
Specifications and availability are subject to change without notice. |